Connect an ISDN telephone

In its ex works state, the elmeg hybird 120/130™ is already prepared for using two ISDN terminals (internal numbers 20 and 21). In this example, a standard ISDN telephone with the internal number 20, as shown on the circuit diagram, will be connected to the elmeg hybird 120/130™.

    Note

    For the ISDN telephone to operate on the elmeg hybird 120/130™, the multiple subscriber number (MSN) 20 needs to be manually configured.

  1. Go to Terminals -> Other phonest -> ISDN -><Internal number 20> .

Terminals -> Other phonest -> ISDN -> <Internal number 20>

Proceed as follows:

  1. Enter a Description for the terminal, e. g. Fred Bloggs .

  2. Leave the Terminal Type set to Telephone .

  3. Confirm with OK.

In the next step a name will be given to the ISDN subscriber with the internal number 20 to improve the overview.

  1. Go to Numbering -> User Settings -> Users -> <User 20> ->Basic Settings.

Numbering -> User Settings -> Users -><User 20> ->Basic Settings

Proceed as follows:

  1. Enter the Name of the user. The name appears on a system telephone's display. In this example, the name of the user is Fred Bloggs .

  2. Leave the remaining settings unchanged and confirm them with Apply.

For the caller's name to be displayed on internal calls, there is the option of configuring the relevant user name in the Numbers submenu.

  1. Gehen Sie zu Numbering -> User Settings -> Users -> <Fred Bloggs> -> Numbers.

Numbering -> User Settings -> Users -> <Fred Bloggs> -> Numbers

Proceed as follows:

  1. Enter the name that is to be displayed under Displayed Description, e. g. Fred Bloggs .

  2. Click Apply.

In the Outgoing Signalisation submenu, the default setting default MSN can be adopted with no changes. The outcome of this setting is that, on outgoing calls the main number with an attached extension number (e. g. Prefix + 9678589 + 20) is signalled as the outgoing number.

Go to Numbering -> User Settings -> Users -> <Fred Bloggs> -> Outgoing Signalisation.

Numbering -> User Settings -> Users -> <Fred Bloggs> -> Outgoing Signalisation

The elmeg hybird 120/130™, when operated on a point-to-point ISDN connection, uses an automated call assignment. As such, a call made to the external number incl. direct dialing number (e. g. Prefix + 9678589 + 20) is routed to the relevant local extension (e. g. internal number 20) with no further configuration.

Copyright© Version 01/2020 bintec elmeg GmbH