First steps

The first time you access the elmeg hybird 120/130™'s web interface, you are prompted to change the password. You then see the system's status page. If the ISDN and ADSL interface have been connected correctly, the link status already shows a green arrow.

System Management -> Status

You can use the wizard to adjust, for example, the IP address of the elmeg hybird 120/130™ and the IP address range of the integrated DHCP server.

	Note
	If these addresses are changed, all the IP terminals may need to be restarted in order to update their IP addresses by DHCP.

Assistants -> First steps -> Basic Setup