Connecting a SIP telephone

When the SIP telephone has been connected as shown in the circuit diagram, you can configure the connected SIP telephones.

In the next step, the SIP telephone user or a local number is assigned.

  1. Go to Terminals -> Other phones -> VoIP -> New.

Terminals -> Other phones -> VoIP -> New

Proceed as follows:

  1. Enter the name of the user under Description, e.g. Joe Bloggs .

  2. For a local terminal, select the predefined Location Not defined (Registration for Private Networks Only) .

  3. For Internal Number, select the entry, e. g. 31 (#31) .

  4. Confirm with OK.

In the next step a name, e. g. User 32 , can be issued to a subscriber to improve the overview.

  1. Go to Numbering -> User Settings -> Users -><User 31> ->Basic Settings.

Numbering -> User Settings -> Users -><User 31> ->Basic Settings

Proceed as follows:

  1. Enter the name of the user under Name, e. g. Joe Bloggs .

  2. Leave the remaining settings unchanged and confirm them with Apply.

For the caller's name to be displayed on internal calls, the following setting needs to be made in the Numbers submenu.

  1. Gehen Sie zu Numbering -> User Settings -> Users -> <Joe Bloggs> -> Numbers.

Numbering -> User Settings -> Users -> <Joe Bloggs> -> Numbers

Proceed as follows:

  1. Enter the name that is to be displayed under Displayed Description, e. g. Joe Bloggs .

  2. Click Apply.

In the Outgoing Signalisation menu, select the number for the user that is to be displayed to the other party on outgoing calls. Here, select one of the multiple subscriber numbers (MSNs) that have been configured.

  1. Go to Numbering -> User Settings -> Users -> <Joe Bloggs> -> Outgoing Signalisation -><31> .

Numbering -> User Settings -> Users -> <Joe Bloggs> -> Outgoing Signalisation -><31>

Proceed as follows:

  1. Under ISDN Extern, select the outgoing number, e. g. 929420 .

  2. Click Apply.

In the next configuration step, you define the Incoming Distribution i. e. specify with which external number the user Joe Bloggs can be reached.

Select with for the table entry with the required external number, e. g. 929420 to assign it to a user.

  1. Go to Numbering -> Call Distribution -> Incoming Distribution -><929420> .

Numbering -> Call Distribution -> Incoming Distribution -><929420>

Proceed as follows:

  1. Under Assignment select Internal Number .

  2. For Internal Number, select the entry 31 (Joe Bloggs) .

  3. Confirm with OK.

Copyright© Version 01/2020 bintec elmeg GmbH