Connect an ISDN telephone

In its ex works state, the elmeg hybird 120/130™ is already prepared for using two ISDN terminals (internal numbers 20 and 21). In this example, a standard ISDN telephone with the internal number 20, as shown on the circuit diagram, will be connected to the elmeg hybird 120/130™.

	Note
	For the ISDN telephone to operate on the elmeg hybird 120/130™, the multiple subscriber number (MSN) 20 needs to be manually configured.

Go to Terminals -> Other phones -> ISDN -> <Internal number 20> .

Terminals -> Other phones -> ISDN -> <Internal number 20>

Enter a Description for the terminal, e. g. Fred Bloggs .
Leave the Terminal Type set to Telephone .
Confirm with OK.

In the next step a name will be given to the ISDN subscriber with the internal number 20 to improve the overview.

Go to Numbering -> User Settings -> Users -> <User 20> ->Basic Settings.

Numbering -> User Settings -> Users -><User 20> ->Basic Settings

Enter the Name of the user. The name appears on a system telephone's display. In this example, the name of the user is Fred Bloggs .
Leave the remaining settings unchanged and confirm them with Apply.

For the caller's name to be displayed on internal calls, there is the option of configuring the relevant user name in the Numbers submenu.

Gehen Sie zu Numbering -> User Settings -> Users -> <Fred Bloggs> -> Numbers.

Numbering -> User Settings -> Users -> <Fred Bloggs> -> Numbers

Enter the name that is to be displayed under Displayed Description, e. g. Fred Bloggs .
Click Apply.

Now the Outgoing Signalisation submenu specifies which external number is to be signalled for this user on outgoing calls. Select one of the multiple subscriber numbers (MSNs) that have been configured.

Go to Numbering -> User Settings -> Users -> <Fred Bloggs> -> Outgoing Signalisation -><20> .

Numbering -> User Settings -> Users -> <Fred Bloggs> -> Outgoing Signalisation-><20>

Under ISDN Extern, select the outgoing number, e. g. 929421 .
Click Apply.

In the next configuration step, you define the Incoming Distribution i. e. specify with which external number the user Fred Bloggs can be reached.

Select with

for the table entry with the required external number, e. g. 929421 to assign it to a user.

Go to Numbering -> Call Distribution -> Incoming Distribution -><929421> .

Numbering -> Call Distribution -> Incoming Distribution -><929421>

Under Assignment select Internal Number .
For Internal Number, select the entry 20 (Fred Bloggs) .
Confirm with OK.