Connect an analogue telephone

In its ex works state, the elmeg hybird 120/130™ is already prepared for using four analogue terminals (internal numbers 10 to 13). In this example, an analogue telephone with the internal number 10, as shown on the circuit diagram, will be connected to the elmeg hybird 120/130™.

  1. Go to Terminals -> Other phones -> analog -> <Internal number 10> .

Terminals -> Other phones -> analog -> <Internal number 10>

Proceed as follows:

  1. Enter a Description for the terminal, e. g. Jim Bloggs .

  2. Leave the Terminal Type set to Telephone .

  3. Confirm with OK.

In the User Settings menu, the analogue subscriber with the internal number 10 can be assigned a name to improve the overview.

  1. Go to Numbering -> User Settings -> Users -> <Jim Bloggs> ->Basic Settings.

Numbering -> User Settings -> Users -> <Jim Bloggs> ->Basic Settings

Proceed as follows:

  1. Enter the Name of the user. The name appears on a system telephone's display. In this example, the name of the user is Jim Bloggs .

  2. Leave the remaining settings unchanged and confirm them with Apply.

For the caller's name to be displayed on internal calls, there is the option of configuring the relevant user name in the Numbers submenu.

  1. Gehen Sie zu Numbering -> User Settings -> Users -> <Jim Bloggs> -> Numbers.

Numbering -> User Settings -> Users -> <Jim Bloggs> -> Numbers

Proceed as follows:

  1. Enter the name that is to be displayed under Displayed Description, e. g. Jim Bloggs .

  2. Click Apply.

Now the Outgoing Signalisation submenu specifies which external number is to be signalled for this user on outgoing calls. Select one of the multiple subscriber numbers (MSNs) that have been configured.

  1. Go to Numbering -> User Settings -> Users -> <Jim Bloggs> -> Outgoing Signalisation ->-> .

Numbering -> User Settings -> Users -> <Jim Bloggs> -> Outgoing Signalisation->->

Proceed as follows:

  1. Under ISDN Extern, select the outgoing number, e. g. 929422 .

  2. Click Apply.

In the next configuration step, you define the Incoming Distribution i. e. specify with which external number the user Jim Bloggs can be reached.

Select with for the table entry with the required external number, e. g. 929422 to assign it to a user.

  1. Go to Numbering -> Call Distribution -> Incoming Distribution -> <929422> .

Numbering -> Call Distribution -> Incoming Distribution -> <929422>

Proceed as follows:

  1. Under Assignment select Internal Number .

  2. For Internal Number, select the entry 10 (Jim Bloggs) .

  3. Confirm with OK.

Copyright© Version 01/2020 bintec elmeg GmbH