Configuring an ISDN port |
The port used for the external ISDN connection must be set up for the access type point-to-point connection (P-P).
Go to the following menu to configure your type of ISDN connection:
Go to Assistants -> PBX -> Trunks -> New.
Choose under Connection Type ISDN (P-P) .
Click on Next to configure a new ISDN P-P connection.
Enter the data required for the connection.
Proceed as follows:
For easier recognition enter a description for the connection under Name, e.g. ISDN Extern .
The Access Type ISDN P-MP cannot be changed, since it depends on your previous choices.
Under Ports click ADD and select the entry Module Slot 3/1 S/U .
Enter a P-P Base Number, e.g. 909.
Under Class of Service click ADD and select the class Default CoS .
Click on Advanced Settings.
Under P-P DDI Exception click on ADD and enter the direct dial number that - according to your numbering plan - is supposed to be routed to a distinct internal number, e.g. 99 and 100 .
Confirm your settings with OK.
A sucessfully established ISDN point-to-point connection is marked with a .
Copyright© Version 01/2020 bintec elmeg GmbH |