Adjusting the metric |
As a load distribution group only becomes active when the default routers belonging to the WAN connections have the same metric, the WAN connection metric that was changed to 0 in an earlier step must now be reset back to metric 1 instead.
Go to the Network->Routes->IPv4 Route Configuration menu.
Network->Routes->IPv4 Route Configuration
Click on the
symbol to edit the entry.
Network->Routes->IPv4
Route Configuration->
Under Metric select the priority of the route, which is 1 in our example.
Confirm with OK.
The load distribution between both xDSL connections is now active.
Copyright© Version 01/2020 bintec elmeg GmbH |