Split tunnel

By default the client sends all data packets into the active tunnel. If you want access to a specific destination network, then you must enter the IP address of this private destination network.

  1. For this purpose, go to be.IP Secure Client Configuration->Profiles in the menu.

    The Profiles window opens.

  2. Double-click on the profile you have set up, e.g. IPSec_Connection_1 .

    The profile settings IPSec_Connection_1 window opens.

  3. Click Split Tunneling on the left-hand side of the list.

    Split Tunneling

  4. Click Add.

    The IP networks window opens.

  5. Enter the IP address and the netmasks of your private network, e.g. 192.168.10.0 and 255.255.255.0 and click OK.

    Your network is displayed in the list.

  6. Click OK.

    The IP networks window closes.

  7. Click OK.

    The Profiles window closes.

Copyright© Version 01/2020 bintec elmeg GmbH