Configuration of  be.IP plus

You must configure the gateway and the DNS server settings of the be.IP plus™. The configuration is done using the be.IP plus™ GUI.

  1. Go to Assistants->First steps->Basic Setup.

Assistants->First steps->Basic Setup

Proceed as follows to make the gateway and DNS settings:

  1. Enter the IP address of your gateway that you use to provide Internet access under Default Gateway IP Address, e.g. 192.168.0.254 .

  2. Enable Fixed DNS Server Address.

  3. Enter the IP address of the name server for Internet address name resolution under DNS Server 1; here it is 192.168.0.254 .

  4. Leave the remaining settings unchanged and confirm them with OK.

Copyright© Version 01/2020 bintec elmeg GmbH