Toplink

The option Caller Address must be enabled for the SIP Header Field: P-Preferred for the SIP provider Toplink.

  1. Go to VoIP->Settings->SIP Provider-> <toplink>-> ->Advanced Settings.

VoIP->Settings->SIP Provider-> <toplink>-> ->Advanced Settings

Proceed as follows to extend the SIP header:

  1. Enable the option Caller Address under SIP Header Field: P-Preferred.

  2. Leave the remaining settings unchanged and confirm them with OK.

Note

If the PBX Wizard is used again for this connection, then all settings are reset in the VoIP->Settings->SIP Provider menu.

Copyright© Version 01/2020 bintec elmeg GmbH