Note

The following description only covers configuration of the function key for activating / deactivating the access point integrated in the be.IP™. This does not cover the settings of the wireless module and creation of a wireless network.

The Full Access view is required for accessibility of the relevant menus.

Configuration interface header bar

On the plan view, the function key can be found on the Ethernet interfaces on the left-hand side next to the RSMA connection (screw-in connection for the WLAN antenna).

The task of monitoring a state - in this case, whether the key is active or inactive - is done by the scheduler. Depending on whether this applies to one or several initiators, specific actions can be carried out, in this example the action would be activating/deactivating the access-point . The initiators are cyclically monitored in an adjustable interval so that there is a time delay between actuating the key and the action of the access point.