Konfigurationsschritte im Überblick |
Konfiguration des Routers in der Außenstelle - IP-Konfiguration
Feld | Menü | Wert |
---|---|---|
Adressmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Statisch |
IP-Adresse / Netzmaske |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
IP-Adresse: z. B. 10.1.0.1 Netzmaske: z. B. 255.255.255.0 |
Schnittstellenmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Untagged |
MAC-Adresse |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Voreingestellte verwenden |
Konfiguration des Routers in der Außenstelle - DHCP-Pool
Feld | Menü | Wert |
---|---|---|
IP-Poolname | Lokale Dienste -> DHCP-Server -> IP-Pool-Konfiguration -> Neu | z. B. Geräte |
IP-Adressbereich | Lokale Dienste -> DHCP-Server -> IP-Pool-Konfiguration -> Neu | z. B. 10.1.0.10 - 10.1.0.254 |
Schnittstelle | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguartion -> Neu | en1-0 |
IP-Poolname | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguration -> Neu | z. B. Geräte |
Pool-Verwendung | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguration -> Neu | Lokal |
Gateway | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguration -> Neu | Router als Gateway verwenden |
Lease-Time | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguration -> Neu | z. B. 120 |
DHCP-Optionen | Lokale Dienste -> DHCP-Server -> DHCP-Konfiguration -> Neu-> Hinzufügen |
DNS-Server : z. B. 10.1.0.1 CAPWAP-Controller : z. B. 10.0.0.123 |
Konfiguration des VPN-Konzentrators in der Zentrale
Feld | Menü | Wert |
---|---|---|
Adressmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Statisch |
IP-Adresse / Netzmaske |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
IP-Adresse : z. B. 10.0.0.1 Netzmaske : z. B. 255.255.255.0 |
Schnittstellenmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Untagged |
MAC-Adresse |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Voreingestellte verwenden |
Konfiguration des WLAN-Controllers in der Zentrale - IP-Konfiguration
Feld | Menü | Wert |
---|---|---|
Adressmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Statisch |
IP-Adresse / Netzmaske |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
IP-Adresse : z. B. 10.0.0.123 Netzmaske : z. B. 255.255.255.0 |
Schnittstellenmodus |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Untagged |
MAC-Adresse |
LAN -> IP-Konfiguration -> Schnittstellen -> <en1-0>
![]() |
Voreingestellte verwenden |
Konfiguration des WLAN-Controllers in der Zentrale - Standardroute
Feld | Menü | Wert |
---|---|---|
Routentyp | Netzwerk -> Routen -> Konfiguration von IPv4 -> Neu | Standardroute über Schnittstelle |
Schnittstelle | Netzwerk -> Routen -> Konfiguration von IPv4 -> Neu | LAN_EN1-0 |
Lokale IP-Adresse | Netzwerk -> Routen -> Konfiguration von IPv4 -> Neu | z. B. 10.0.0.1 |
Metrik | Netzwerk -> Routen -> Konfiguration von IPv4 -> Neu | z. B. 1 |
Konfiguration des WLAN-Controllers in der Zentrale - WLAN-Controller
Feld | Menü | Wert |
---|---|---|
Region | Wireless LAN Controller -> Controller-Konfiguration -> Allgemein | z. B. Germany |
Schnittstelle | Wireless LAN Controller -> Controller-Konfiguration -> Allgemien | LAN_EN1-0 |
DHCP-Server | Wireless LAN Controller -> Controller-Konfiguration -> Allgemien | Extern oder statisch |
Slave-AP-Standort | Wireless LAN Controller -> Controller-Konfiguration -> Allgemien | Entfernt (WAN) |
Konfiguration des WLAN-Controllers in der Zentrale - Drahtlosnetzwerk-Profil
Feld | Menü | Wert |
---|---|---|
Netzwerkname (SSID) | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | z. B. Mitarbeiter (Sichtbar) |
Intra-cell Repeating | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Aktiviert |
ARP Processing | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Deaktiviert |
WMM | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Aktiviert |
Max. Clients | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | z. B. 32 |
Sicherheitsmodus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | WPA-PSK |
WPA-Modus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | WPA und WPA 2 |
WPA-Cipher | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | TKIP |
WPA2-Cipher | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | AES |
Preshared Key | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Zeichenfolge mit 8 - 63 Zeichen |
ACL-Modus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Deaktiviert |
Erlaubte Adressen | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Keine |
VLAN | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) | Deaktiviert |
Konfiguration des WLAN-Controllers in der Zentrale - Funkmodulprofile
Feld | Menü | Wert |
---|---|---|
Beschreibung |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
z. B. 2.4 GHz Radio Profile |
Betriebsmodus |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
Access-Point |
Frequenzband |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
2,4 GHz In / Outdoor |
Anzahl der Spatial Streams |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
2 |
Drahtloser Modus |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
802.11 g / n |
Max. Übertragungsrate |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
Auto |
Burst-Mode |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
Aktiviert |
Kanalplan |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
Benutzerdefiniert |
Benutzerdefinierter Kanalplan |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
1 , 5 , 9 , 13 |
Beacon Period |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
100 ms |
DTIM Period |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio Profile
![]() |
2 |
RTS Threshold |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio
![]() |
2347 |
Short Guard Interval |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio
![]() |
Aktiviert |
Short Retry Limit |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio
![]() |
7 |
Long Retry Limit |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio
![]() |
4 |
Fragmentation Threshold |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> 2.4 GHz Radio
![]() |
2346 Bytes |
Konfiguration des WLAN-Controllers in der Zentrale - Access Points
Feld | Menü | Wert |
---|---|---|
Standort |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
z. B. Nbg - Geschäft |
CAPWAP-Verschlüsselung |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
Aktiviert |
Betriebsmodus |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
Ein |
Aktives Funkmodulprofil |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
z. B. 2.4 GHz Radio Profile |
Kanal |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
Auto |
Verwendeter Kanal |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
z. B. 13 |
Sendeleistung |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
Max. |
Zugewiesene Drahtlosnetzwerke (VSS) |
Wireless LAN Controller -> Slave-AP-Konfiguration -> Slave Access Points
![]() |
z. B. vss-1: Mitarbeiter |
E-Mail-Benachrichtigung einrichten - Einstellungen
Feld | Menü | Wert |
---|---|---|
Benachrichtigungsdienst | Externe Berichterstellung ->Benachrichtigungsdienst -> Benachrichtigungseinstellungen | Aktiviert |
Maximale E-Mails pro Minute | Externe Berichterstellung ->Benachrichtigungsdienst -> Benachrichtigungseinstellungen | z. B. 6 |
E-Mail-Adresse des Senders | Externe Berichterstellung ->Benachrichtigungsdienst -> Benachrichtigungseinstellungen | z. B. wlc@itcompany.tld |
SMTP-Server | Externe Berichterstellung ->Benachrichtigungsdienst -> Benachrichtigungseinstellungen | z. B. smtp.mail.com |
SMTP- Authentifizierung | Externe Berichterstellung ->Benachrichtigungsdienst -> Benachrichtigungseinstellungen | z. B. Keine |
E-Mail-Benachrichtigung einrichten - Empfänger
Feld | Menü | Wert |
---|---|---|
Empfänger | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | z. B. admin@itcompany.tld |
Nachrichtenkomprimierung | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | Aktiviert |
Betreff | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | z. B. WLAN-Status: Zweigstellen |
Ereignis | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | Verwalteter AP offline |
Timeout für Nachrichten | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | z. B. 60 |
Anzahl Nachrichten | Externe Berichterstellung -> Benachrichtigungsdienst ->Benachrichtigungsempfänger -> Neu | z. B. 1 |
Copyright© Version 01/2020 bintec elmeg GmbH |