Konfigurationsschritte im Überblick |
Funkmodulprofile konfigurieren
Aktion | Menü | Wert |
---|---|---|
Betriebsmodus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> Neu | Access-Point |
Frequenzband | Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> Neu | 2,4 GHz In/Outdoor |
Anzahl der Spatial Streams | Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> Neu | 2 |
Drahtloser Modus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> Neu | 802.11 g/n |
Max. Übertragungsrate | Wireless LAN Controller -> Slave-AP-Konfiguration -> Funkmodulprofile -> Neu | Auto |
Funkmodulprofile konfigurieren
Aktion | Menü | Wert |
---|---|---|
Netzwername (SSID) | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | z. B. Bintec-Dev-Voice |
Intra-cell Repeating | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | Deaktiviert |
Sicherheitsmodus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | WPA-PSK |
WPA-Modus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | WPA2 |
WPA2 Cipher | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | AES und TKIP aktiviert |
Preshared Key | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | z. B. supersecret |
ACL-Modus | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | Deaktiviert |
VLAN-ID | Wireless LAN Controller -> Slave-AP-Konfiguration -> Drahtlosnetzwerke (VSS) -> Neu | 10 |
Feld | Menü | Wert |
---|---|---|
Call number | Numbers -> New | z. B. 2011 |
DHCP mode | Network -> Network B | Enable |
SSID | Network -> Network B | z. B. Bintec-Dev-Voice |
Security mode | Network -> Network B | WPA-PSK & WPA2-PSK |
WPA-PSK passphase | Network -> Network B | z. B. supersecret |
Voice power save mode | Network -> Network B | U-APSD |
802.11b/g/n channels | Network -> Network B | 1,6,11 |
IP DSCP for voice = 0x2E (46) | Network -> Network B | 0x2E (46) |
IP DSCP for signaling = 0x2E (46) | Network -> Network B | 0x2E (46) |
User display text | Device -> Settings | z. B. bintec elmeg |
Active network | Device -> Settings | Network B |
Time zone | Device -> General | Central European Time (GMT+1) |
NTP server | Device -> General | z. B. 192.168.1.254 |
VoIP protocol | VoIP -> General | SIP |
SIP proxy IP address | VoIP -> SIP | z. B. 192.168.2.253 |
SIP proxy password | VoIP -> SIP | z. B. supersecret |
Authentication identity | VoIP -> SIP | Endpoint number |
Feld | Menü | Wert |
---|---|---|
Basierend auf Ethernet-Schnittstelle | LAN -> IP-Konfiguration -> Schnittstellen -> Neu | z. B. en1-4 |
Schnittstellenmodus | LAN -> IP-Konfiguration -> Schnittstellen -> Neu | Tagged (VLAN) |
VLAN-ID | LAN -> IP-Konfiguration -> Schnittstellen -> Neu | 10 |
Anrufweiterschaltung konfigurieren
Feld | Menü | Wert |
---|---|---|
Interne Rufnummer | Anrufkontrolle -> Ausgehende Dienste -> Anrufweiterschaltung (AWS) -> Neu | Interne Nummer |
Art der Anrufweiterschaltung | Anrufkontrolle -> Ausgehende Dienste -> Anrufweiterschaltung (AWS) -> Neu | Bei Besetzt/Bei Nichtmelden |
Zielnummer (Bei Besetzt) | Anrufkontrolle -> Ausgehende Dienste -> Anrufweiterschaltung (AWS) -> Neu | Zielnummer |
Zielnummer (Bei Nichtmelden) | Anrufkontrolle -> Ausgehende Dienste -> Anrufweiterschaltung (AWS) -> Neu | Zielnummer |
Copyright© Version 01/2020 bintec elmeg GmbH |