Configure wireless network profile

Next, the default existing profile for a wireless network is modified as follows.

  1. Go to Wireless LAN Controller -> Slave AP Configuration->Wireless Networks (VSS).

To do this, for the existing entry <vss-1> click the symbol.

Wireless LAN Controller -> Slave AP Configuration->Wireless Networks (VSS)-> <vss-1>

Proceed as follows:

  1. The Network Name (SSID) is change to e. g. Staff .

  2. The default settings are left for Intra-cell Repeating and Max. Clients.

  3. As the Security Mode, select WPA-PSK .

  4. You can then leave the WPA Mode set to WPA and WPA 2 .

  5. For WPA Cipher, TKIP is enabled and, for WPA2 Cipher, AES is enabled.

  6. The Preshared Key is the WLAN access password for all the employees. Enter an ASCII string with 8 - 63 characters.

  7. Confirm with OK.

Copyright© Version 08/2020 bintec elmeg GmbH