Configure the VPN concentrator at head office |
As a supplement to the IP workshop »RIPv2 Routing Protocol over IPSec Connection«, the IP interface of the VPN concentrator at head office is set up as follows.
Go to menu
LAN -> IP
Configuration ->Interfaces ->
<en1-0>
.
LAN ->
IP Configuration-> Interfaces ->
<en1-0>
Proceed as follows:
For the Address Mode, select Static .
In this field, enter the IP Address e. g. 10.0.0.1 and the Netmask 255.255.255.0 .
Leave the Interface Mode set to Untagged .
Confirm with OK.
Copyright© Version 08/2020 bintec elmeg GmbH |