Configure the IP address for the virtual Bridge Interface |
Configure a virtual bridge interface with VLAN ID 10, so that the WLAN clients can access the local service, e.g. DHCHP, DNS and Echo. Configure an IP address for this interface.
Go to the following menu:
Go to LAN->IP Configuration->Interfaces->News.
LAN->IP Configuration->Interfaces->New
Proceed as follows:
Set br0 under Based on Ethernet Interface.
Leave, under Interface Mode, the Tagged (VLAN) entry.
Enter the VLAN ID value 10 .
Under Security Policy select Untrusted .
Leave the Address Mode Static .
Click Add. Enter the IP address, e.g. 192.168.11.1 . Leave the Netmask 255.255.255.0 .
Press OK to confirm your entries.
The result of your configuration is shown in the list in the last line.
LAN->IP Configuration->Interfaces->New
Copyright© Version 08/2020 bintec elmeg GmbH |