Configuring the IP address

Configure an IP address from the LAN interface.

  1. Go to LAN->IP Configuration->Interfaces-><en1-0>->

LAN->IP Configuration->Interfaces-><en1-0>->

Proceed as follows to configure the IP address:

  1. Set the Security Policy to Trusted .

  2. Leave the Address Mode on Static .

  3. Click Add. Enter the IP address, e.g. 192.168.10.1 . Leave Netmask 255.255.255.0 .

  4. Press OK to confirm your entries.

Copyright© Version 08/2020 bintec elmeg GmbH