Configuring VLANs

VLAN Management is pre-configured by default on your device. Now create the VLANs Development and Public .

Go to the following menu to create a VLAN:

  1. Go to LAN -> VLAN -> VLANs -> New.

LAN -> VLAN -> VLANs -> New

Proceed as follows:

  1. Under VLAN Identifier enter a value between 1 and 4094, in this example 2 .

  2. Under VLAN Name enter Development for example.

  3. Under VLAN Members click Add and select the corresponding WLAN interface, e.g. vss2-1 . In addition, select the Egress Rule Untagged .

  4. Under VLAN Members click Add and select the corresponding LAN interface, e.g. en1-0 . In addition, select the Egress Rule Tagged .

  5. Click OK.

Repeat these steps to create the Public VLAN.

  1. Under VLAN Identifier enter a value between 1 and 4094, in this example 3 .

  2. Under VLAN Name enter Public for example.

  3. Under VLAN Members click Add and select the corresponding WLAN interface, e.g. vss2-2 . In addition, select the Egress Rule Untagged .

  4. Under VLAN Members click Add and select the corresponding LAN interface, e.g. en1-0 . In addition, select the Egress Rule Tagged .

  5. Click OK.

Copyright© Version 08/2020 bintec elmeg GmbH