LAN configuration |
First of all, change the IP address in the IP Configuration menu.
Go to
LAN -> IP Configuration -> Interfaces -> <en1-0>
.
LAN -> IP Configuration -> Interfaces -> <en1-0>
.
Proceed as follows:
Set the Interface Mode to Untagged .
Enter the IP Address / Netmask 192.168.100.254 .
Confirm with OK.
Now add the virtual interface.
Go to LAN -> IP Configuration -> Interfaces -> New.
LAN -> IP Configuration ->Interfaces -> New
Proceed as follows:
For Based on Ethernet Interface, select en1-0 .
For Interface Mode, select Tagged (VLAN) .
Assign a VLAN ID to the interface, e. g. 15 .
Use Add to enter the IP Address / Netmask 192.168.15.254 .
Confirm with OK.
You have added a virtual interface en1-0-1 with the VLAN ID 15 .
Go to LAN -> IP Configuration -> Interfaces -> New to create another interface.
For Based on Ethernet Interface, select en1-0 .
For Interface Mode, select Tagged (VLAN) .
Assign a VLAN ID to the interface, e. g. 16 .
Use Add to enter the IP Address / Netmask 192.168.16.254 .
Confirm with OK.
You have added a virtual interface en1-0-2 with the VLAN ID 16 .
After this configuration, the Interfaces menu looks like this.
LAN -> IP Configuration -> Interfaces
Copyright© Version 08/2020 bintec elmeg GmbH |