Creation of radio profiles |
At least one radio profile must be created.
If access points with two radio modules are to be administered, a radio profile must be created for 2.4 GHz and 5 GHz. The parameters are identical to the default configuration of the bintec access points or the WLAN Controllers.
Go to the Configuration->Radio ->New radio profile menu.
New radio profile
Proceed as follows:
Enter a Name for the radio profile.
Set Operation mode to Access Point.
Select the 20 MHz Bandwidth for Operation band = 2.4 GHz .
Select the 20 MHz or 40 MHz Bandwidth for Operation band = 5 GHz .
Set the Wireless mode for 2.4 GHz profile to 802.11b/g/n .
Set the Wireless mode for 5 GHz profile to 802.11ac/a/n .
Confirm your details by clicking on Save.
Copyright© Version 08/2020 bintec elmeg GmbH |