Removing ports from VLAN management

The ports that you have assigned to the Development and Public VLANs will be removed from VLAN Management .

To do this, go to the following menu:

  1. Go to LAN -> VLAN -> VLANs -> <Management> -> .

LAN -> VLAN -> VLANs -> <Management> ->

Proceed as follows:

  1. Click the icon for Interface vss2-1 .

  2. Click the icon for Interface vss2-2 .

  3. Leave the Interfaces en1-0 , en1-1 and vss2-0 Untagged under Egress Rule.

  4. Click OK.

You have now set up all the necessary VLANs. You can check these in the list in the LAN -> VLAN -> VLANs menu.

VLAN overview

Copyright© Version 08/2020 bintec elmeg GmbH