Configuration |
A SIP subscriber must be set up for the VoWLAN telephone. The DSCP value being set to 0x2E / 101110 / 46, which is vital, is taken into account as the default setting, so that no further change is required here.
In our example, the network interface of the elmeg hybird 300™ must be tagged with VLAN ID 10 .
To access the configuration interface enter the IP address of the elmeg hybird 300™ in your Web browser.
Go to LAN -> IP Configuration -> Interfaces -> New.
LAN -> IP Configuration ->Interfaces -> New
Proceed as follows:
For Based on Ethernet Interface, select the virtual interface, e. g. en1-4 .
For Interface Mode, select Tagged (VLAN) .
For VLAN ID, enter 10 .
Confirm with OK.
Copyright© Version 08/2020 bintec elmeg GmbH |