SIP provider (individual number)

The following describes how to set up a SIP provider when using an individual number connection.

	Note
For certain SIP providers, a STUN server must be configured for gateways with established VoIP PBX in LAN assistant.

Enter a name for the SIP provider under Name, e.g. Sipgate_Plus_1 .
Enter your provider's Authentication ID (SIP-ID), e. g. 1527861e0 .
Enter the Password you received from your VoIP provider.
For Login Name, enter the name that your VoIP provider has sent you, e. g. 1527861e0 . This is the SIP-ID for the providers Sipgate, 1&1, QSC and Toplink.
Enter an IP address or a domain name as the SIP Registrar.
- For Sipgate Basic/Plus: sipgate.de
- For 1&1: sip.1und1.de
- For QSC-IPfonie basic: sip.qsc.de
- When connecting the Deutsche Telekom Call & Surf Comfort IP connection: tel.t-online.de
- For Toplink: toplink-voice.de

Use Add under Single Number (MSN) to create a new entry.

Enter the number that your VoIP provider has given you under Single Number (MSN), e.g. 4911148797640 .

Enter a name for the connection under Displayed Name, e.g. Sipgate_1 . This is displayed on the system telephone for incoming calls.

	Note
Several numbers can be configured here for the providers QSC-IPfonie basic and Toplink. For the providers Sipgate Basic/Plus, 1&1 and Deutsche Telekom, an additional SIP connection with separate SIP account data must be created for each additional number provided by the SIP provider. In order to enable outgoing calls to be made via other numbers or SIP connections, additional authorisation classes should be configured under Numbering->User Settings->Class of Services.

Note

Several numbers can be configured here for the providers QSC-IPfonie basic and Toplink.

For the providers Sipgate Basic/Plus, 1&1 and Deutsche Telekom, an additional SIP connection with separate SIP account data must be created for each additional number provided by the SIP provider. In order to enable outgoing calls to be made via other numbers or SIP connections, additional authorisation classes should be configured under Numbering->User Settings->Class of Services.

The Class of Service leave behind Default CoS .
Enable Generate international phone number and Generate national subscriber number.
Leave the remaining settings unchanged and confirm them with OK.

After the system is successfully registered with the SIP provider, the status display of the respective SIP connection changes to .

SIP provider (individual number)

Contents: