QSC-IPfonie extended

The option Caller Address must be enabled for the SIP Header Field: FROM User for the SIP provider QSC-IPfonie extended.

  1. Go to VoIP->Settings->SIP Provider-> <qsc_ipfonie_extended> ->Advanced Settings.

VoIP->Settings->SIP Provider-> <qsc_ipfonie_extended> ->Advanced Settings

Proceed as follows to extend the SIP header:

  1. Enable the option Caller Address under SIP Header Field: FROM User.

  2. Leave the remaining settings unchanged and confirm them with OK.

Note

If the PBX Wizard is used again for this connection, then all settings are reset in the VoIP->Settings->SIP Provider menu.

Copyright© Version 08/2020 bintec elmeg GmbH