Readme for system software 7.1.2 PATCH 5
========================================
========================================

The following changes have been made to our software since the release of system software 7.1.2. They have been included in system software 7.1.2 PATCH 5 which is available from BinTec's web server for VPN-Access 5.


New Features:
=============


1) IPSec ?  IPSec with RADIUS
=======================================================

RADIUS Support for interface based IPSec connections has been implemented.



2) Setup ?  Licenses Menu
=======================================================

The Licenses Menu has been reinserted into the Setup Tool.



Bugfixes:
=========


1) ETH - Auto Negotiation on Ethernet Interface
=======================================================

Using Auto Negotiation as Ethernet Mode could lead to bad Ethernet performance, if the necessary setting was not determined correctly.

The problem has been solved.



2) HTML Wizard
====================================================

There were a number of small errors in the HTML Wizard.

The problems have been solved.



3) System - Factory Reset
====================================================

The Factory Reset mode was not working.

The problem has been solved.



4) AUX
====================================================

External Devices which were connected on the AUX Port were not working.

The problem has been solved.



5) SSH - SSH Login
====================================================

The SSH Login was not working.

The problem has been solved.



6) IPSec ? Back Route Verify
====================================================

Packets were dropped if Back Route Verificaion was activated on the physical interface over which the IPSec Tunnel was established and if IPComp was activated on the IPSec connection.

The problem has been solved.



7) IPSec ? BRRP & IPSec
====================================================

IPSec was not working if BRRP was configured.

The problem has been solved.



8) Setup ? WAN Partner IP Menu
====================================================

There were a number of small errors in the WAN Partner IP menu.

The problems have been solved.



9) IPSec connections

===========================================

Under some circumstances the initialization of an IPSec connection failed.

The problem has been solved.



10) RADIUS ? RADIUS Dialout
====================================================

The reload interval for RADIUS Dialout was not working.

The problem has been solved.



11) RADIUS ? MS-CHAP V2 & MPPE
====================================================

It was not possible to use a RADIUS Server for connections using MS-CHAP V2 & MPPE.

The problem has been solved.