Last Minute Information:
================================================================================

This document contains Last Minute Information regarding all BinTec products
and is intended as an important supplement to the Release Notes for your product.

 Issue:
 -------------------------------------------------------------------------------
    Applicable Product(s):
    Affected Release(s):
    Issue Description:
 -------------------------------------------------------------------------------

 

 1. Incoming Calls not Accepted
 -------------------------------------------------------------------------------
    Product(s):     BinGO! Plus, BinGO! Professional, V!CAS
    Release(s):     4.9.4 only
    Description:    When you leave the PABX->Extensions menu within Setup Tool
                    by pressing "save", the router no longer accepts incoming
                    calls to the destinations "isdnlogin" or "application"
                    until the next reboot.

                    This problem has been corrected in release 4.9.4 patch 1. 


 2. Running "setup" command may cause loss of data
 -------------------------------------------------------------------------------
    Product(s):     any
    Release(s):     4.9.5 and previous
    Description:    When you run the "setup" command on the SNMP shell, the
                    currently active connections may lose some data packets.
                    Although this shouldn't cause problems when using protocols 
                    capable of recovering data packets it may be critical 
                    for connections with channel bundling (MLPPP), resulting 
                    in the disconnection of B channels as a worst case.
    Workaround:     Run "setup" only when the activity on the router is as low
                    as possible.


 3. Encapsulation X25_ppp does not work without CLID
 -------------------------------------------------------------------------------
    Product(s):     BRICK-X21
    Release(s):     4.9.5
    Description:    When using encapsulation "x25_ppp" in combination with
                    inband authentication via PPP (PAP or CHAP) no incoming
                    X.25 connection can be established, but the B channel is
                    connected for 60 seconds.
    Workaround:     Use no or outband authentication (CLID).
     -------------------------------------------------------------------------------
  
 4. Extended Interface Settings submenu Misplaced
 -------------------------------------------------------------------------------   
    Product(s):     any
    Release(s):     5.1.1
    Description:    In the Setup Tool VPN - ADD in Relaese 5.1.Revision 1, the 
    		    submenu Extended Interface Settings is misplaced. The 
    		    settings that lie behind it are only relevant for PPP.