===================================================================
BinTec Communications AG                                March 2001
NDIS 3 Miniport Driver for MS-Windows 95    Variant 1 Version: 6.28
===================================================================

This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.


TABLE OF CONTENTS.

1.  SOFTWARE DESCRIPTION
2.  SYSTEM REQUIREMENTS
3.  INSTALLATION NOTES
4.  KNOWN ISSUES
5.  TECHNICAL SUPPORT

-------------------------------------------------------------------

1.  SOFTWARE DESCRIPTION

1.1 About this software
    This Driver supports the BinTec XAIR card.

1.2 Files Installed
    The following files will be installed in the Windows designated
    directory:

    NDIS 3 Miniport driver for Windows 95             version 6.28
        WCBIN41.EXE
        WIBIN41.DLL
        WLBIN41.INF
        WLBIN41.SYS
        WLBIN.CNT
        WNBIN41.CPL
        WNBIN.HLP
        WUBIN41.VXD

-------------------------------------------------------------------

2.  SYSTEM REQUIREMENTS

2.1 Operating System
    This Driver is for the Microsoft Windows 95 Operating System.

-------------------------------------------------------------------

3.  INSTALLATION NOTES

3.1 Standard Installation
    Please refer to the 'Getting Started Guide' or 'User's
    Guide' that came with your product.

-------------------------------------------------------------------

4.  KNOWN ISSUES

4.1 I/O Port conflicts under MS-Windows 95.

    When your XAIR card installation completed successfully,
    but it does not become operational (XAIR Communication Manager 
    reports "XAIR card not operational"), you are advised to try a
    different I/O Port value. The Windows Resource Manager does
    not always detect a conflict. This problem has been noticed
    under Windows 95 OSR 0.
    
4.2 Add/Edit profile does not appear upon installation.

    The XAIR driver requires Common Control DLL's 4.0 or later.
    
	You can resolve this error by either:
	* Installing Microsoft Internet Explorer 4.0 or later. 
	* Run the patch 50comupd.exe provided on the installation CD.

-------------------------------------------------------------------

5.  TECHNICAL SUPPORT

5.1 Finding Information
    On the BinTec Web Site you can find the most recent
    device drivers, bridge firmware, software updates and
    user documentation.

    World Wide Web:    http://www.bintec.de

5.2 Contact Technical Support
    If you encounter problems when installing or using this
    product, or would like information about our other
    BinTec products, please contact us .

    *  E-Mail (Service): service@BinTec.de
    *  Phone  (Support): 0190851068
===================================================================
                          END OF FILE