===================================================================
BinTec Communications AG                                March 2001
NDIS 4 Miniport Driver for MS-Windows NT4   Variant 1 Version: 6.28
===================================================================

This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.


TABLE OF CONTENTS.

1.  SOFTWARE DESCRIPTION
2.  SYSTEM REQUIREMENTS
3.  INSTALLATION NOTES
4.  KNOWN ISSUES
5.  TECHNICAL SUPPORT

-------------------------------------------------------------------

1.  SOFTWARE DESCRIPTION

1.1 About this software
    This Driver supports the BinTec XAIR card.

1.2 Files Installed
    The following files will be installed in the Windows designated
    directory:

    NDIS 4 Miniport driver for Windows NT4            version 6.28
        WLBIN52.SYS
        OEMSETUP.INF
        WCBIN52.EXE
        WNBIN52.CPL
        WLBIN.CNT
        WNBIN.HLP
        README.TXT

-------------------------------------------------------------------

2.  SYSTEM REQUIREMENTS

2.1 Operating System
    This Driver is for the Microsoft Windows NT4 Operating System.

-------------------------------------------------------------------

3.  INSTALLATION NOTES

3.1 Standard Installation
    Please refer to the 'Getting Started Guide' or 'User's
    Guide' that came with your product.

-------------------------------------------------------------------
4.  KNOWN ISSUES

4.1 I/O Port conflicts under MS-Windows NT4.

    When your ORiNOCO Card's installation completed successfully,
    but it does not become operational, you are advised to try a
    different I/O Port value.

4.2 IRQ conflicts under MS-Windows NT4.

    When your XAIR Card installation completed successfully,
    but it does not become operational, you are advised to try a
    different IRQ value.
    
4.3 Add/Edit profile does not appear upon installation

    The ORiNOCO driver requires Windows NT Service Pack 4 or higher.
    
    In case you are running SP3 or lower, your Windows NT system
    does not provide the Windows system DLLs required to make the
    Add/Edit profile window work.

	You can resolve this error by either:
	* Installing Microsoft Windows NT Service Pack 4 or higher
	  (SP 6 is recommended), 
	* Run the patch 50comupd.exe provided on the installation CD.

-------------------------------------------------------------------
5.  TECHNICAL SUPPORT

5.1 Finding Information
    On the BinTec Web Site you can find the most recent
    device drivers, bridge firmware, software updates and
    user documentation.

    World Wide Web:    http://www.bintec.de

5.2 Contact Technical Support
    If you encounter problems when installing or using this
    product, or would like information about our other
    BinTec products, please contact us .

    *  E-Mail (Service): service@BinTec.de
    *  Phone  (Support): 0190851068
===================================================================
                          END OF FILE